Press Release: Massive Audio, of Southern California, is happy to announce the release of the Massive Audio BAS6 and BAS8; 6.5” and 8″ Powered Cast Basket Subwoofers pre-installed within an industrial grade carpeted ported enclosure.
The pre-loaded subwoofers are conservatively rated to handle 250w and 400w RMS, yet efficient enough to yield a high Sound Pressure Levels. They use high temperature 4 layer voice coils and incorporate tight red stitching that is sewn through a Kevlar fiber-enhanced non-pressed paper cone with an EROM foam surround.
The critical function of keeping the voice coil centered in the magnetic gap is performed by triple black poly cotton spiders with mirror image layout and woven round tinsel leads. The enclosure is equipped with quick disconnect 4 AWG Power, REM and ground terminals allowing you to remove the box quickly when extra cargo space is needed. Their enclosure utilizes deep heavy duty black anodized steel grills to protect the cone as well allowing for maximum X-max. A clipping LED is used to protect the entire system.
These subwoofers are powered by a high-performance built-in amplifier with (ATO) Auto Turn-On, Audio Sensing and Remote Trigger. The built-in Hi-Low converter allows you to connect directly from your system without the need of an additional module and its associated cost. Another unique feature is the inclusion of a Remote Bass control with adjustments up to 12db @ 45Hz. Additionally, there are adjustment controls for Low Pass with built-In 12dB Octave Butterworth Crossover, Bass Boost, Phase to 180°.
FEATURES INCLUDE:
- Die Cast Basket Subwoofer with Black Textured Finish
- Kevlar Fiber Enhanced Non-Pressed Paper Cone with Textured Paint Finish
- EROM Foam Surround with Red Stitching
- Heavy Duty 4-Layer Hi-Temp Voice Coils
- Fiberglass Woven Dust Cap
- Double Stacked High Energy Magnets
- Enhanced Cooling T-yoke Design with Black Anodized Finish
- Customized Rubber Gasket and Magnet Boot
- Triple Black Poly Cotton Spiders with Mirror Image Layout
- Black Anodized Deep Steel Grill
- High Power / High Temperature Black Anodized Former
- Quick Disconnect 4 AWG PWR / GND / REM Terminals
- Low Pass Control with Built-In 12dB Octave Butterworth Crossover
- Phase Control ~ 0° – 180°
- Clip LED Indicator
- Bass Boost from 0dB ~ +12dB @45Hz
- Remote Gain Control
- High Quality Industrial Grade Carpet Ported Enclosure
| MSRP | BAS6 – $259.99 | BAS8 – $299.99 |
| Size | 6.5″ | 8″ |
| Watts RMS | 250w | 400w |
| Cone | Kevlar Fiber Non-Pressed Paper | Kevlar Fiber Enhanced Paper |
| Voice Coil | 1.5″ | 2″ |
| Surround | EROM Foam | EROM Foam |
| Magnet | Double Stacked 55oz | Double Stacked 90oz |
| Terminals | Quick Disconnect | Quick Disconnect |
| Basket | Heavy Gauge Cast Aluminum | Heavy Gauge Cast Aluminum |
| Tinsel Leads | Heavy Duty Triple | Heavy Duty Triple |
| X-Max | 10mm (1-way) | 11mm (1-way) |
| Crossover Control | Variable 50Hz ~ 200Hz / 12dB | Variable 50Hz ~ 200Hz / 12dB |
| Bass Boost | 0 ~ -12dB @45Hz | 0 ~ -12dB @45Hz |
| Frequency Response | 25Hz ~ 200Hz | 25Hz ~ 200Hz |
| Input Sensitivity | 200mV ~ 10V | 200mV ~ 10V |
| Dimensions | 14″ x 9″ x 10.6″ | 17.1″ x 11″ x 10.6″ |
| Bass Remote | Included | Included |
For more information contact [email protected] or visit http://www.massiveaudio.com
